Cirmech - Logo  
 
Home Profile Products Events Applications Exports   Feedback Location Contact Us
        ◊ Products :
  CIRWIND CHEESE WINDER
Model Cwm-300 (Magnetic Type)
Model Cwm-400 (Inverter Type)
  CIRWIND CIRCULAR LOOM
  LOOM CONVERSION
Conversion For HDN-4/HDE-4 Loom
Loom Conversion For SL-4 Loom
 
ABOVE ASSEMBLY CONSISTS OF FOLLOWING MAIN ITEMS. (Refer enclosed line diagram, item shown in RED will be supplied.)
 

Loom Centre Portion:

Complete Centre Loom with Hoop Ring Assembly, Reed Ring Assembly, Bearing Block – Belt Assembly, Cam Assembly, 06 No’s, Shuttle Assembly, Compensator Assembly, as shown in accompanying catalogue.A suitable Take up frame structure only on which will be mounted the old Take up Assembly to take your take up pillars outside and accompanying hardware. Main Motor Inverter in a separate panel box which will be synchronized with your existing Main Control panel

 
ABOVE ASSEMBLY DOES NOT INCLUDE FOLLOWING ITEMS AND WILL BE USED FROM YOUR OLD LOOM
 
Creel Assembly along with Adopters, Eyelet Brackets etc Main Loom Frame, Platforms, Guide Rollers, Intake Roller, Combs etc Take up Gear Box, Pick Gears, Take up Pillars and Take up Roller Assembly, Cloth Winder Assembly complete with Drive & Motor. Main Motor & Main Control Panel, Magnetic Weft Stop Motion, Caliper Cone assembly – Cloth Spreader Assembly
 
Production
 
A) Approx 2,700 * meters/day on 10 x 10 mesh at 900ppm.
B) Approx 3,000 * meters/day on 10 x 10 mesh at 1000ppm
 
* (Assuming 700 to 800 denier tapes on good quality bobbins with 18 – 20% elongation and 3.0-3.5 kg breaking strength)
 
 
CLS 6 Loom-1
Circular Loom

Cheese Winder 1.2
Cheese Winder

Loom Conversion for HDN-4 Loom
Loom Conversion
Home | Profile | Products | Events | Applications | Exports | Feedback | Site Map | Location | E-mail | Contact Us
Powered by : SEO by:
googletoprankingseo.com